Poretech

; Poretech

Lab Equipment

Gas Mixing Box

Gas mixing box is designed for each costumer according to specific requirements of the involved process

Up to 6 gases as standard

Operating pressure up to 100 bar as standard

Flow rate is measured and controlled through high quality Mass Flow Controllers with 1% of precision and 0.1% of repeatability, equipped with compatible elastomers

Easy calibration for other gases

Control by PLC

For non-standard features and further information, please consult PID Eng&Tech

Section image gas-mixing-box.jpg

Catalyst Calcination Systems (CCS)

The Catalyst Calcination Systems (CCS) consists of a bench scale high temperature equipment including:

2 x Modbus mass flow controllers. Up to 200 Nml/min N2 (He) and 200 Nml/min H2 (standard, option of expanding to up to 3 MFC’s), Hi-Tec Bronkhorst, precision 1% FS, repeatability 0.1%, with process compatible elastomers. DIGITAL Modbus communications.

Provision for Additional gas fed line including shut-off and check valves

Shut-off valves and check-valves (Kalrez elastomer) for each gas line, and turbulent flow gas mixer.

1/8” Filters at MFC inlet.

Reactor furnace in SS304 for tubular reactors up to 25,4 mm. OD , with radiant ceramic fiber heaters. Maximum temperature 1000ºC ± 2ºC (depending on reactor MOC). Very low thermal inertia (no overshoot) and good temperature distribution.

Top and bottom Adapters for two reactor sizes; 14,3 mm and 19,1 mm. OD

Tubular reactor is not supplied

Insulation box with furnace and layout tubing inside 1/8” High temperature shut-off valves inside the insulation box, installed before and after reactor

Layout inside the insulation box made in SS316 1/8” OD tubing. ¼” OD for exhaust gases

High temperature connector for thermocouple

Reactor temperature control. Pressure and temperature indication inside the box.

Automatic switch-off of gases in the event of any trouble with pressure or temperature

Section image catalyst-calcination-system.jpg

Liquefied Gas Feeding System

This system allows feeding different gases in liquid phase into a main process

Flow rate from 0.1 to 5.0 mL/min as standard , up to 130 mL/min as special configuration

Operating temperature from -10 to 5 ºC as standard in the pump head

Operating pressure up to 150 bar as standard

Gases such as ethane, propane, butane, carbon dioxide, ammonia…

Skid mounted

For non-standard features and further information, please consult PID Eng&Tech

Section image liquied-gas-feeding-system.jpg

Poretech - Copyright © All Rights Reserved